| Mëttelméisseg gemooss | Flësseg, Gas, Damp |
| Mëttelméisseg Temp | -40℃~+200℃; -40℃~+280℃; 40℃~+350℃ |
| Nominell Drock | 1.6MPa; 2.5MPa; 4.0MPa (Aneren Drock kann personaliséiert ginn, muss de Fournisseur konsultéieren) |
| Genauegkeet | 1,0% (Flange), 1,5% (Insertion) |
| Miessbereich Verhältnis | 1:10 (Standard Klimaanlag als Referenz) 1:15 (Flësseg) |
| Flow Range | Flëssegkeet: 0,4-7,0m/s; Gas: 4.0-60.0m/s; Damp: 5,0-70,0 m/s |
| Spezifikatioune | DN15-DN300(Flange), DN80-DN2000(Insertion), DN15-DN100(Thread), DN15-DN300(Wafer), DN15-DN100(Sanitär) |
| Kommunikatioun | RS485 Modbus, HART |
| Material | SS304 (Standard), SS316 (Optional) |
| Drock Verloscht Koeffizient | Cd≤2.6 |
| Schwéngungsbeschleunegung erlaabt | ≤0,2g |
| IEP ATEX | II 1G Ex ia IIC T5 Ga |
| Ambient Zoustand | Ambient Temperatur: -40 ℃ -65 ℃ (Net explosiounsbeständeg Site); -20 ℃ -55 ℃ (Explosioun-proof Site) Relativ Fiichtegkeet: ≤85% Drock: 86kPa-106kPa |
| Energieversuergung | 12-24V/DC oder 3,6V Batterie ugedriwwen |
| Signal Ausgang | Pulsfrequenzsignal 2-3000Hz, Niddereg Niveau≤1V, Héichniveau≥6V |
| Zwee-Drot System 4-20 Signal (isoléiert Ausgang), Laascht ≤500 |
| Kaliber (mm) | Innendurchmesser D1(mm) | Längt L (mm) | Flange baussenzegen Duerchmiesser D3 (mm) | Zentral Duerchmiesser vu Bolzen Loch B (mm) | Flange Dicke C(mm) | Bolt Loch Duerchmiesser D (mm) | Schrauwen Quantitéit N |
| 25 | 25 | 170 | 115 | 85 | 16 | 14 | 4 |
| 32 | 32 | 170 | 140 | 100 | 16 | 18 | 4 |
| 40 | 40 | 190 | 150 | 110 | 16 | 18 | 4 |
| 50 | 50 | 190 | 165 | 125 | 18 | 18 | 4 |
| 65 | 65 | 220 | 185 | 145 | 18 | 18 | 4 |
| 80 | 80 | 220 | 200 | 160 | 20 | 18 | 8 |
| 100 | 100 | 240 | 220 | 180 | 20 | 18 | 8 |
| 125 | 125 | 260 | 250 | 210 | 22 | 18 | 8 |
| 150 | 150 | 280 | 285 | 240 | 22 | 22 | 8 |
| 200 | 200 | 300 | 340 | 295 | 24 | 22 | 12 |
| 250 | 250 | 360 | 405 | 355 | 26 | 26 | 12 |
| 300 | 300 | 400 | 460 | 410 | 28 | 26 | 12 |
| Gréisst (mm) | Flësseg (Referenzmedium: Normaltemperatur Waasser, m³/h) | Gas (Referenzmedium: 20 ℃, 101325pa Conditioun Loft, m³/h) | ||
| Standard | Verlängert | Standard | Verlängert | |
| 15 | 0.8~6 | 0.5~8 | 6~40 | 5~50 |
| 20 | 1~8 | 0.5~12 | 8~50 | 6~60 |
| 25 | 1.5~12 | 0.8~16 | 10~80 | 8~120 |
| 40 | 2.5~30 | 2~40 | 25~200 | 20~300 |
| 50 | 3~50 | 2.5~60 | 30~300 | 25~500 |
| 65 | 5~80 | 4~100 | 50~500 | 40~800 |
| 80 | 8~120 | 6~160 | 80~800 | 60~1200 |
| 100 | 12~200 | 8~250 | 120~1200 | 100~2000 |
| 125 | 20~300 | 12~400 | 160~1600 | 150~3000 |
| 150 | 30~400 | 18~600 | 250~2500 | 200~4000 |
| 200 | 50~800 | 30~1200 | 400~4000 | 350~8000 |
| 250 | 80~1200 | 40~1600 | 600~6000 | 500~12000 |
| 300 | 100~1600 | 60~2500 | 1000~10000 | 600~16000 |
| 400 | 200~3000 | 120~5000 | 1600~16000 | 1000~25000 |
| 500 | 300~5000 | 200~8000 | 2500~25000 | 1600~40000 |
| 600 | 500~8000 | 300~10000 | 4000~40000 | 2500~60000 |
| Absolute Drock (Mpa) | Temperatur (℃) | |||||
| 150 | 200 | 250 | 300 | 350 | 400 | |
| 0.1 | 0.52 | 0.46 | 0.42 | 0.38 | ||
| 0.15 | 0.78 | 0.70 | 0.62 | 0.57 | 0.52 | 0.49 |
| 0.2 | 1.04 | 0.93 | 0.83 | 0.76 | 0.69 | 0.65 |
| 0.25 | 1.31 | 1.16 | 1.04 | 0.95 | 0.87 | 0.81 |
| 0.33 | 1.58 | 1.39 | 1.25 | 1.14 | 1.05 | 0.97 |
| 0.35 | 1.85 | 1.63 | 1.46 | 1.33 | 1.22 | 1.13 |
| 0.4 | 2.12 | 1.87 | 1.68 | 1.52 | 1.40 | 1.29 |
| 0.5 | 2.35 | 2.11 | 1.91 | 1.75 | 1.62 | |
| 0.6 | 2.84 | 2.54 | 2.30 | 2.11 | 1.95 | |
| 0.7 | 3.33 | 2.97 | 2.69 | 2.46 | 2.27 | |
| 0.8 | 3.83 | 3.41 | 3.08 | 2.82 | 2.60 | |
| 1.0 | 4.86 | 4.30 | 3.88 | 3.54 | 3.26 | |
| 1.2 | 5.91 | 5.20 | 4.67 | 4.26 | 3.92 | |
| 1.5 | 7.55 | 6.58 | 5.89 | 5.36 | 4.93 | |
| 2.0 | 8.968 | 7.97 | 7.21 | 6.62 | ||
| 2.5 | 11.5 | 10.1 | 9.11 | 8.33 | ||
| 3.0 | 14.2 | 12.3 | 11.1 | 10.1 | ||
| 3.5 | 17.0 | 14.6 | 13.0 | 11.8 | ||
| 4.0 | 17.0 | 15.1 | 13.6 | |||
| LUGB-2 | x | x | x | x | x | x | x | x | x | x | x | ||
| Kaliber | DN15-300mm/1/2"-12" | ||||||||||||
Mëttelméisseg gemooss |
Saturéiert Damp | S | |||||||||||
| Superheated Damp | M | ||||||||||||
| Gemeinsam Gas | C | ||||||||||||
| Flëssegket | L | ||||||||||||
| Anerer | O | ||||||||||||
Nominell Drock |
0,6 MPa | 1 | |||||||||||
| 1,0 MPa | 2 | ||||||||||||
| 1,6 MPa | 3 | ||||||||||||
| 2,5 MPa | 4 | ||||||||||||
| 4,0 MPa | 5 | ||||||||||||
| Nominell Temperatur | -40℃~250℃ | 2 | |||||||||||
| -40℃~350℃ | 3 | ||||||||||||
Struktur |
Kompakt Typ | C | |||||||||||
| Remote Typ (Converter Display) | R1 | ||||||||||||
| Remote Typ (Flow Computer Remote Display) | R2 | ||||||||||||
Verbindung |
Flange (DN15-300mm) |
PN10/PN16/PN25/PN40(DIN) | D** | ||||||||||
| A15:150#, A30:300# (ANSI) | A** | ||||||||||||
| 10K/20K/30K/40K (JIS) | J** | ||||||||||||
| Wafer (DN15-300mm) | W | ||||||||||||
| Fuedem (DN15-100mm) | T | ||||||||||||
| Insertion (DN80-2000mm) | ech | ||||||||||||
| Kierper Material | SS304 (Standard) | 4 | |||||||||||
| SS316 | 6 | ||||||||||||
Kompensatioun |
Ouni | W0 | |||||||||||
| Mat Temperaturkompensatioun | WT | ||||||||||||
| Mat Drockkompensatioun | WP | ||||||||||||
| Mat Temperatur- an Drockkompensatioun | W2 | ||||||||||||
| Ausgang | 4-20mA, Puls, RS485 | A | |||||||||||
| 4-20mA, Puls, HART (nëmmen Converter Display) | B | ||||||||||||
Energieversuergung |
DC 24V | D | |||||||||||
| 3.6V Batterie ugedriwwen (nëmmen Converter Display) | B | ||||||||||||
| AC220V (nëmmen Flow Computer Typ) | A | ||||||||||||
| Ex-Beweis | Ouni | W | |||||||||||
| Mat (Exia ll CT5 Ga) | E | ||||||||||||
