| Medium yang diukur | Cecair, gas, stim |
| Temp sederhana | -40℃~+200℃; -40℃~+280℃; 40℃~+350℃ |
| Tekanan nominal | 1.6mpa; 2.5mpa; 4.0mpa (tekanan lain boleh menjadi adat, memerlukan pembekal perundingan) |
| Ketepatan | 1.0%(bebibir), 1.5%(penyisipan) |
| Nisbah pengukur pelbagai | 1:10 (keadaan udara standard sebagai rujukan) 1:15 (cecair) |
| Julat aliran | Cecair: 0.4-7.0m / s; Gas: 4.0-60.0m / s; Steam: 5.0-70.0m / s |
| Spesifikasi | DN15-DN300 (Flange), DN80-DN2000 (sisipan), DN15-DN100 (Thread), DN15-DN300 (wafer), DN15-DN100 (Sanitary) |
| Komunikasi | RS485 Modbus, Hart |
| Bahan | SS304 (standard), SS316 (pilihan) |
| Koefisien kehilangan tekanan | CD≤2.6 |
| Percepatan getaran dibenarkan | ≤0.2g |
| IEP atex | Ii 1g ex ia iic t5 ga |
| Keadaan ambien | Temp ambien: -40 ℃ -65 ℃ (tapak bukan bukti-bukti); -20 ℃ -55 ℃ (tapak bukti letupan) Kelembapan relatif: ≤85% Tekanan: 86KPA-106KPA |
| Bekalan kuasa | 12-24v / dc atau 3.6v bateri berkuasa |
| Output isyarat | Isyarat kekerapan nadi 2-3000Hz, tahap rendah ≤1v, tahap tinggi ≥6v |
| Sistem dua wayar 4-20 isyarat (output terpencil), beban ≤500 |
| Berkaliber (mm) | Diameter dalaman D1 (mm) | Panjang l (mm) | Diameter luar flange D3 (mm) | Central Dia of Bolts Hole B (mm) | Ketebalan bebibir c (mm) | Diameter lubang bolt d (mm) | Kuantiti skru n |
| 25 | 25 | 170 | 115 | 85 | 16 | 14 | 4 |
| 32 | 32 | 170 | 140 | 100 | 16 | 18 | 4 |
| 40 | 40 | 190 | 150 | 110 | 16 | 18 | 4 |
| 50 | 50 | 190 | 165 | 125 | 18 | 18 | 4 |
| 65 | 65 | 220 | 185 | 145 | 18 | 18 | 4 |
| 80 | 80 | 220 | 200 | 160 | 20 | 18 | 8 |
| 100 | 100 | 240 | 220 | 180 | 20 | 18 | 8 |
| 125 | 125 | 260 | 250 | 210 | 22 | 18 | 8 |
| 150 | 150 | 280 | 285 | 240 | 22 | 22 | 8 |
| 200 | 200 | 300 | 340 | 295 | 24 | 22 | 12 |
| 250 | 250 | 360 | 405 | 355 | 26 | 26 | 12 |
| 300 | 300 | 400 | 460 | 410 | 28 | 26 | 12 |
| Saiz (mm) | Cecair (medium rujukan: air suhu normal, m³ / h) | Gas (Rujukan Medium: 20 ℃, 101325PA Keadaan udara, m³ / h) | ||
| Standard | Dilanjutkan | Standard | Dilanjutkan | |
| 15 | 0.8~6 | 0.5~8 | 6~40 | 5~50 |
| 20 | 1~8 | 0.5~12 | 8~50 | 6~60 |
| 25 | 1.5~12 | 0.8~16 | 10~80 | 8~120 |
| 40 | 2.5~30 | 2~40 | 25~200 | 20~300 |
| 50 | 3~50 | 2.5~60 | 30~300 | 25~500 |
| 65 | 5~80 | 4~100 | 50~500 | 40~800 |
| 80 | 8~120 | 6~160 | 80~800 | 60~1200 |
| 100 | 12~200 | 8~250 | 120~1200 | 100~2000 |
| 125 | 20~300 | 12~400 | 160~1600 | 150~3000 |
| 150 | 30~400 | 18~600 | 250~2500 | 200~4000 |
| 200 | 50~800 | 30~1200 | 400~4000 | 350~8000 |
| 250 | 80~1200 | 40~1600 | 600~6000 | 500~12000 |
| 300 | 100~1600 | 60~2500 | 1000~10000 | 600~16000 |
| 400 | 200~3000 | 120~5000 | 1600~16000 | 1000~25000 |
| 500 | 300~5000 | 200~8000 | 2500~25000 | 1600~40000 |
| 600 | 500~8000 | 300~10000 | 4000~40000 | 2500~60000 |
| Tekanan mutlak (MPA) | Suhu (℃) | |||||
| 150 | 200 | 250 | 300 | 350 | 400 | |
| 0.1 | 0.52 | 0.46 | 0.42 | 0.38 | ||
| 0.15 | 0.78 | 0.70 | 0.62 | 0.57 | 0.52 | 0.49 |
| 0.2 | 1.04 | 0.93 | 0.83 | 0.76 | 0.69 | 0.65 |
| 0.25 | 1.31 | 1.16 | 1.04 | 0.95 | 0.87 | 0.81 |
| 0.33 | 1.58 | 1.39 | 1.25 | 1.14 | 1.05 | 0.97 |
| 0.35 | 1.85 | 1.63 | 1.46 | 1.33 | 1.22 | 1.13 |
| 0.4 | 2.12 | 1.87 | 1.68 | 1.52 | 1.40 | 1.29 |
| 0.5 | 2.35 | 2.11 | 1.91 | 1.75 | 1.62 | |
| 0.6 | 2.84 | 2.54 | 2.30 | 2.11 | 1.95 | |
| 0.7 | 3.33 | 2.97 | 2.69 | 2.46 | 2.27 | |
| 0.8 | 3.83 | 3.41 | 3.08 | 2.82 | 2.60 | |
| 1.0 | 4.86 | 4.30 | 3.88 | 3.54 | 3.26 | |
| 1.2 | 5.91 | 5.20 | 4.67 | 4.26 | 3.92 | |
| 1.5 | 7.55 | 6.58 | 5.89 | 5.36 | 4.93 | |
| 2.0 | 8.968 | 7.97 | 7.21 | 6.62 | ||
| 2.5 | 11.5 | 10.1 | 9.11 | 8.33 | ||
| 3.0 | 14.2 | 12.3 | 11.1 | 10.1 | ||
| 3.5 | 17.0 | 14.6 | 13.0 | 11.8 | ||
| 4.0 | 17.0 | 15.1 | 13.6 | |||
| LUGB-2 | x | x | x | x | x | x | x | x | x | x | x | ||
| Berkaliber | DN15-300mm / 1 / 2 "-12" | ||||||||||||
Medium yang diukur |
Steam tepu | S | |||||||||||
| Stim superheated | M | ||||||||||||
| Gas biasa | C | ||||||||||||
| Cecair | L. | ||||||||||||
| Yang lain | O | ||||||||||||
Tekanan nominal |
0.6MPa | 1 | |||||||||||
| 1.0mpa | 2 | ||||||||||||
| 1.6mpa | 3 | ||||||||||||
| 2.5mpa | 4 | ||||||||||||
| 4.0mpa | 5 | ||||||||||||
| Suhu nominal | -40℃~250℃ | 2 | |||||||||||
| -40℃~350℃ | 3 | ||||||||||||
Struktur |
Jenis padat | C | |||||||||||
| Jenis Jauh (Paparan Penukar) | R1 | ||||||||||||
| Jenis Jauh (Paparan Jauh Komputer Aliran) | R2 | ||||||||||||
Sambungan |
Flange (DN15-300mm) |
Pn10 / pn16 / pn25 / pn40 (din) | D ** | ||||||||||
| A15: 150#, A30: 300# (ANSI) | A ** | ||||||||||||
| 10k / 20k / 30k / 40k (jis) | J ** | ||||||||||||
| Wafer (DN15-300mm) | W | ||||||||||||
| Thread (DN15-100mm) | T | ||||||||||||
| Penyisipan (DN80-2000mm) | I | ||||||||||||
| Bahan badan | SS304 (standard) | 4 | |||||||||||
| SS316 | 6 | ||||||||||||
Pampasan |
Tanpa | W0 | |||||||||||
| Dengan pampasan suhu | Wt | ||||||||||||
| Dengan pampasan tekanan | WP | ||||||||||||
| Dengan pampasan suhu & tekanan | W2 | ||||||||||||
| Output | 4-20mA, Pulse, Rs485 | A | |||||||||||
| 4-20mA, Pulse, Hart (paparan penukar sahaja) | B | ||||||||||||
Bekalan kuasa |
DC24V | D | |||||||||||
| Bateri 3.6v berkuasa (paparan penukar sahaja) | B | ||||||||||||
| AC220V (jenis komputer aliran sahaja) | A | ||||||||||||
| Ex-bukti | Tanpa | W | |||||||||||
| Dengan (exia ll ct5 ga) | E | ||||||||||||
