Electromagnetic water meter GSM/GPRS remote monitoring management topology diagram 4. This system introduces more humanized management such as data backup, SIM card cost statistics and so on.
Electromagnetic water meter GSM/GPRS remote monitoring management can set multiple operators at different levels, play data hierarchical management, and realize data sharing of user LAN.
With simple structure ,the flow meter is of high reliability without lining in the measuring pipe . The wide range of the nominal bore is suitable for all the pipe size between DN50 and DN300.
Measuring Range :0~12m/s ; Conductive Ratio of the Medium :5¦Ìs/cm Medium Temperature : -10¡æ~55¡æ ; Power Supplied : 3.6V DC in-built Lithium ion battery power supplied , continually working for more than three years.
With simple structure ,the flow meter is of high reliability without lining in the measuring pipe . The wide range of the nominal bore is suitable for all the pipe size between DN2 and DN600. Measurement is independent of fluid density ,viscosity ,humidity ,temperature pressure and conductivity.
Easy Setup Minimal Straight Pipe Forward or Reverse flow and Total IP65,IP67 ,IP68 Rated (optional) Virtually No Pressure Loss
Self-diagnosis fault alarm GSM data infinitely transmitted LCD display cumulative flow£¬instanta- neous flow£¬ flow rate,flow percentage,etc.
Full digital signal processing, stable measurement, high measurement accuracy Automatic two-way flow measurement, on-site instantaneous flow, positive and negative cumulative total display
Size DN50 to DN300 pipe line Suitable for all conductive liquids No moving parts Near zero pressure drop Wide range in electrode: SS316, Ti, HC, HB, Ta, Pt Multi-choice in flange: DIN, GB, ANSI, JIS, EN, etc
The sensor with advanced processing technology and liquid airproof is of long natural life and of nice resistance to shaking leakage.It guarantees the instrument good precision and stability .
No Moving Parts RS485 Standard,HART standard is available. Suitable for Pipes Up to DN300 Pulse, Gprs output Standard 5 points calibration Included
Various liner materials are available:PTFE, FEP, PFA, F46, Rubber Wide rang in communication:RS485, Modbus, ,GPRS IP68 protection class is for remote type
Electromagnetic water meter is widely used in iron and steel, electric power, petroleum, chemical industry, coal, metallurgy,Papermaking, water supply and drainage, food, medicine and other industries.
Application: Outdoor,underground.Especially Without power supply places. Battery Powered: 3.6V lithium battery Communication Interface:RS485 Wireless Communication:GSM¡¢GPRS¡¢CDMAProtection:IP68
Electromagnetic water meter is of high reliability without lining in the measuring pipe . The wide range of the nominal bore is suitable for all the pipe size between DN50 and DN300.
LCD display with multiple FlowUnits Selectable ‘Flow Only’¡®Flow + Pressure”Flow +Temperature. Digital Signal Processing,Stablemeasurement,High Accuracy,Strong Anti-interference Capability
A variety of electrodes and linings are available for a variety of complex working conditions. It is unaffected by changes in temperature, density, viscosity, concentration and electrical conductivity.
Forward and reverse flow measurement. Measure pulp and slurry, water and wastewater, food and beverage, acid and alkaline. Multiple output communication (pulse, GPRS, RS485),
GSM/GPRS remote monitoring management software system can query, count, analyze and display the water usage of each measuring point in the form of graphs or curves.
LCD display, display Cumulative flow,lnstantaneous flow Forward flow, Reverseflow Units: L/h. L/m. L/s. m3/h. m3/m. m 3/s.GPM Language: English, ltalian, Spanish,Russian Japanese, Korean, etc.
Electromagnetic water meter use a magnetic field to generate and channel liquid flow through a pipe. It have high accuracy and stability. The battery’s working life is mor than 8 years.
Process pressure£º-0.1~0.5MPa Measurement accuracy£º¡À1mm Protection class£ºIP67 Explosion-proof grade£ºExib II CT6 Gb Shell material£ºCast aluminum/stainless steel Signal output£º4-20mA, HART (two-wire, four-wire), RS485 Modbus
80G radar level meter is FMCW radar operating at 76-81 GHz, which has a maximum measuring range of 120m and a minimum blind zone of 8cm. It supports 4-wire and 2-wire applications. Higher operating frequency and shorter wavelength make it ideal for solid applications,
humidity: ¡Ü95%RH Enclosure: Aluminum alloy, stainless steel Antenna type: Lens antenna/anti-corrosive antenna / flange isolated by quartz Process temperature: -40~85¡æ; -40~200¡æ; Process pressure: -0.1~2MPa Product Size: ?100*270mm Cable entry: M20*1.5 Protection class: IP67 Explosion-proof grade: ExdiaIICT6 Installation method: Thread or flange
Frequency Range£º76~81GHz Scope of application£ºStrong corrosive liquid level, stirring, water vapor condensation Measuring range£º120m Process connection£ºflange, thread Medium temperature£º-40~120¡æ
Frequency: 76GHz ~ 81GHz, 5GHz FMCW bandwidth Measuring range: 0.3 m ~ 60m 0.08m~30m 0.6m ~ 120m Measurement accuracy: ¡À1mm Beam angle: 3¡ã/8¡ã Power: 15~28VDC Communication: MODBUS HART/Series Signal output: 4 ~ 20mA or RS-485
