high accuracy ultrasonic deep water liquid level sensor

Q&T PTFE Liquid Level Sensor PVDF Sensor ultrasonic level transmitter is a digital level meter with high- performance microprocessor to process signals; It meets the requirements of material level without the contact. It can be widely used for level measurement of municipal river, urban groundwater level, sewage treatment station, water works, etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T Magnetic Level Gauge can be used to measure the liquid level of kinds of vessels in the shapes of water tower, kettle, groove and ball as well as boiler furnace. It can be used under highsealing, leak prevention, high pressure, high temperature and corrosion condition, which is safe and reliable. It makes up for the deficiency of fuzzy instruction and fragility of the glass plate level gauge.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

Q&T sanitary ultrasonic level Gauge is a digital level meter with high- performance microprocessor to process signals; It meets the requirements of material level without the contact. It can be widely used for level measurement of municipal river, urban groundwater level, sewage treatment station, water works, etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T PTFE Liquid Level Sensor Non Contact Ultrasonic Level meter has optional Output: 4-20 mA, relay and Hart etc; This ultrasonic liquid level transmitter can easily connect up to most systems. Ultrasonic level Sensor Material optional ABS, PVC, PTFE; Anti-corrosive with PTFE Probe.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM series Ultrasonic level meter is digital type non contact level measurement for liquid, solid etc.Ultrasonic level meter could meet most of the level measurement requirements. Material. It support various connections like thread or flange connection type which is much easier for user.
Level Range: 4m, 6m, 8m, 10m, 12m, 15m, 20m, 30m
Accuracy: 0.5%-1.0%
Resolution: 3mm or 0.1%
Display: LCD display
Analog Output: Two wire 4-20mA (250ohm Load)
Power Supply: DC24V
Environmental Temperature: Transmitter: -20 ~ + 60 degC
Sensor: -20 ~ + 80 degC
Working Pressure: Ambient pressure
Communication: HART

humidity: ¡Ü95%RH
Enclosure: Aluminum alloy, stainless steel
Antenna type: Lens antenna/anti-corrosive antenna / flange isolated by quartz
Process temperature: -40~85¡æ; -40~200¡æ;
Process pressure: -0.1~2MPa
Product Size: ?100*270mm
Cable entry: M20*1.5
Protection class: IP67
Explosion-proof grade: ExdiaIICT6
Installation method: Thread or flange

76-81 GHZ frequency modulation wave FMCW radar products (also called a millimeter wave radar), because it USES higher than Ku band radar frequency millimeter wave band, the remote target detection, strong smoke dust environment.

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application. QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic level tank meter is made up of ABS or PTFE probe which is with acid and alkali resistance. QTLM ultrasonic level meter could be safety installed in complex environments. Support various different connection ways like thread or flange connection.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

This PTFE Liquid Level Sensor Sanitary Water Liquid Ultrasonic level meter has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application.One machine can handle various conditions.QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.Especially for sewage treatment, paper pulp, urban water supply etc
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultrasonic level sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception.The sensor fully enclosed probe,improve the intensity of the transmitted signal,integrated casting,good long-term stability.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Frequency: 76GHz ~ 81GHz, 5GHz FMCW bandwidth
Measuring range: 0.3 m ~ 60m
0.08m~30m
0.6m ~ 120m
Measurement accuracy: ¡À1mm
Beam angle: 3¡ã/8¡ã
Power: 15~28VDC
Communication: MODBUS
HART/Series
Signal output: 4 ~ 20mA or RS-485

Two wire Ultrasonic level meter sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception. Ultrasonic level tank meter is a cost-effective and reliable solution. For measuring liquid and solid level at ranges of up to 30 meters. It support direct reading on the LCD display, and output 4-20mA and HART.
Range:4-30m
Application:Liquid / Solid
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

The small field angle and energy concentration enhanced echo capabilities, and beneficialto avoid interference.
Minimized measuring blind spot can gain better result in better performar
High SNR, even in the case of fluctuations can result of small tank measurement.

80G radar level meter is FMCW radar operating at 76-81 GHz, which has a maximum measuring range of 120m and a minimum blind zone of 8cm. It supports 4-wire and 2-wire applications. Higher operating frequency and shorter wavelength make it ideal for solid applications,

Two wire Ultrasonic level meter with the feature of contactless and material independent, easy and flexible mounting. QTLM ultrasonic level sensor adopt temperature compensation, over voltage and over current protection, which could ensure safety use.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

PTFE Liquid Level Sensor High accuracy Ultrasonic Level Meter is microprocessor controlled digital level instrument, a good choice of Oil Diesel Fuel Liquid Level Meter. Ultrasonic pulses generated by the sensor (transducer) sent in the measurement, the surface acoustic wave after reflection by the liquid or receiving the same ultrasonic receiver transducer.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM series Ultrasonic level transmitter adopt the time of flight measuring principle, widely used for liquid, slurry and solid level tank,Especially for sewage treatment, paper pulp, urban water supply etc. Integrated temperature compensation improves accuracy, with built-in 4-20mA and HART communication,4-20mA ultrasonic level sensor adopt advanced clamp type terminal, to ensure that wiring never loose and remains accurate.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultrasonic level sensor emits ultrasonic pulses in the direction of the medium,which support various connections like thread or flange connection type which is much easier for user.QTLM series Ultrasonic level transmitter have full-screen self-illumination,easy setting and debugging of liquid level measurement, support 4-20mA two wire output, which is widely used in water, fuel tank, food tank, solid level application.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM non contact ultrasonic level meters are all well tested in Q&T factory. Q&T professional engineers will test every piece of level meters and provide calibration reports in shipping box. To save freight cost, Q&T team design small size and safety export standard carton boxes for users.

The Vertical magnetic Level Indicator is easy to read the water level; Because of the construction of the flaps, one side white and on the other red / orange it is possible to see the level over a greater distance or in darker places.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

Ultrasonic fuel tank level sensor is integrated design, with big show window of LCD which is easy to debug, observe and installed conveniently.
Ultrasonic level gauge adopt Advanced since the clamp type terminal, to ensure that wiring never loose.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

The emission angle is less than 3 ¡ã, which is suitable for narrow space or guided wave pipeline measurement
Measuring range could reach to 120M, which is suitable for the measurement of large storage tanks
Measurement dead zone is in the range of 7-8CM, suitable for the measurement of small storage tanks

76GHz-81GHz FM wave radar
5GHz ultra-large FM scanning frequency width, wide application
Support standard HART, RS485 / MODBUS bus protocol
Support operation mode such as upper computer setting software, tank side table, etc.
24VDC power supply
Simple installation structure, adapt to various installation forms on site

QTLM for circuit design, high-quality power modules are selected to be as power supply parts and highly stable and reliably imported devices are used as components of the meter. It can fully replace imported foreign meters of the same type.ultrasonic level meter intelligent technology software can make intelligentized echo analysis. It needs neither debugging nor other special steps.The sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception. This technology has functions of dynamic thinking and dynamic analysis.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Two wire Ultrasonic level meter is a popular field-proven level measuring device in more than hundreds applications worldwide. QTLM Ultrasonic levle meter is a stable measurement device, which will not influenced by the measuring medium properties. Integrated temperature compensation improves accuracy with analog and HART communication.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

The product has extremely high measurement accuracy, suitable for high-precision measurement level measurement
The product has rich echo processing algorithms and empirical data of various working conditions; it has unique advantages than other similar products in the application of extremely harsh working conditions such as strong dust, steam, or special process storage tanks with stirring and heating rods.

QTLM series Ultrasonic level transmitter adopt the time of flight measuring principle, widely used for liquid, slurry and solid level tank. 4-20mA ultrasonic level sensor adopt advanced clamp type terminal, to ensure that wiring never loose.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered