Saturated steam stainless steel vortex steam flowmeter 4-20mA output

Flow meter vortex use gas calibration adopt venturi nozzle calibration system, easy installation and no moving parts to maintain or repair, flowmeter vortex has leak detect function. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304 (Standard),SS316 (Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Insertion vortex flow meter adopts Japan technology,with military regulation SS304 or SS316 sensor, guarantee the accuracy and stability of steam flowmeter. Size: DN15-DN6000;
Accuracy: ¡À1.0 % (Flange/wafer/thread/tri-clamp; ¡À1.5%(Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Intelligent vortex flow meter adopt military regulations proved SS316 sensor, guarantee the accuracy and stability of versatile vortex flowmeter in measuring liquid or gas fluid. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Vortex flow meter adopts Japan technology to improve product stability and accuracy. Achieve high accuracy ¡À0.75% of reading in liquids measurement, ¡À1.0% of reading in steam or gas flow measurement.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered
Signal Output: 4-20mA,Pulse

Mass flow meter steam flow meter is applicable for liquid or gas measurement,the liquid vortex meter and steam vortex meter with different k factor guarantee the accuracy. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vapor vortex flowmeter adopt gas venturi nozzle system carry out the calibration,accuracy with ¡À1.0%, every steam flowmeter will be well calibrated before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Gas vortex flowmeter has sufficient stock,with DIN,ANSI,JIS flanges in stock for fast delivery,RS485 modbus vortex flowmeter 4-20mA is popular in power plant or boiler plant. Measured medium:liquid,gas,steam;Medium Temp:-40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy:¡À1.0 %(Flange/wafer/thread/tri-clamp; ¡À1.5 %(Insertion type) Flow Range:Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Steam flow meter adopt gas venturi nozzle system carry out the calibration,accuracy with ¡À1.0%,Insertion vortex flow meter with accuracy ¡À1.5%, every flow meter will be well calibrated before leave factory.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp,¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s
Gas:4.0-60.0m/s
Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Vapor vortex flowmeter adopt Japan technology,the accuracy and stability are well improved,steam flow meter enjoy ¡À0.75% of reading in liquids, ¡À1.0% in steam or gas. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Relative Humidity: ¨Q85%

RS485 MODBUS vortex flow meter 4-20mA specially for flow measurement of gases and liquids in industry pipeline,vortex flowmeter requires higher accuracy before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Steam flow meter with low price specially for superheated steam in pipeline,mass flowmeter steam flow meter for custody transfer purpose compare with other gas flow meter. Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Flowmeter vortex specially for flow measurement of gases and liquids in industry pipeline,vortex liquid mass flow meter requires strict calibration with higher accuracy before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Vortex liquid flowmeter has the sanitary connection, the triclamp could remove during calibration,sanitary vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Q&T vortex steam flow meters are designed to measure mass flow for saturated and superheated steam without the need for an external flow computer.Inline and insertion style meters are available.
ize: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%

Air flow meter vortex flow meter use gas venturi nozzle calibration system do the calibration, easy installation and no moving parts to maintain or repair, Air flowmeter has leak detect function. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Vortex air flow meter offer many advantages including easy installation without impulse lines,no moving parts to maintain or repair, less leak potential and a wide flow turndown range.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Communication: RS485 MODBUS or HART

Intelligent vortex meter calibration adopt the pulse signal to calibrate the vortex flow meter, 5 testing points and each points run three times to guarantee the accuracy.
Measured medium: liquid,gas,steam;
Medium Temp: -40℃~250℃,-40℃~350℃,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ≤0.2g
Relative Humidity:≤85%

Air flowmeter vortex flowmeter adopt gas venturi nozzle system carry out the calibration,accuracy with ¡À1.0%,every vapor vortex flow meter will be well calibrated before leave factory. Size: DN15-DN6000;
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

air flowmeter vortex flowmeter is applicable for liquid or gas measurement,the calibration is different for vapor vortex flow meter and liquid vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Q&T vortex liquid mass flow meter use for liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy good accuracy in actual measurement.
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Vortex shedding flow meter are also in widespread use for measuring mass flow.modern vortex meters are built for more than merely measuring volume flow, and come complete with temperature sensor and flow computer.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Power Supply: DC 12-30V or 3.6V battery powered

Air flowmeter vortex flowmeter has flange,wafer,triclamp,insertion connection etc,vapor vortex flow meter output signals 4-20mA, pulses, HART or MODBUS? RTU are available. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Pressure: 86kPa -106kPa

Vortex steam flowmeter has flange,wafer,triclamp,insertion connection etc,steam vortex flow meter output signals 4-20mA, pulses, HART or MODBUS? RTU are available. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Pressure: 86kPa -106kPa

Steam flow meter adopt gas venturi nozzle system carry out the calibration,accuracy with ¡À1.0%,every flow meter will be well calibrated before leave factory.
Size: DN15-DN6000
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Insertion vortex flowmeter enjoy accuracy ¡À1.5%,air flow meter vortex flowmeter is workable with liquid or gas measurement,the calibration medium is different base on actual medium. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Steam vortex flowmeter adopt gas venturi nozzle calibration system do testing,accuracy with ¡À1.0%, every vortex shedding flow meter will be well calibrated before leave Q&T factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Air vortex flowmeter operate under the vortex shedding principle,where an oscillating vortexes occur when a fluid flow past a bluff (as opposed to streamlined) body,also call as shedding flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%

Compact vortex flow meter with flange,wafer,triclamp,insesrtion connection etc,with the same basic output signals and networking options: 4-20mA, pulses, HART or MODBUS? RTU.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Power Supply: DC 12-30V or 3.6V battery powered

Smart vortex flow meter specially for flow measurement of gases and liquids in industry pipeline,vortex flow meter requires higher accuacy before leave factory.
Size: DN15-DN6000
Measured medium: liquid,gas,steam;
Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa